Vilros Basic Starter Kit for Raspberry Pi Zero W
(This kit includes the Original Pi Zero W, NOT the Pi Zero W 2)
The Basic Starter Kit from Vilros includes the Following Items:
Raspberry Pi Zero W (Available With Presoldered Header or With out)
802.11 b/g/n wireless LAN
BCM 2835 SOC @ 1GHz processor
wi fi and Bluetooth 4.1 & Low Energy (BLE)
40 pin gpio pin
1GHz, single-core CPU
Micro sd slot
Micro HDMI and USB On-The-Go ports
Micro USB power
HAT-compatible 40-pin header
Composite video and reset headers
1080p HD video stream
CSI raspberry pi zero camera connector
40 pin gpio
Built in wifi
Case For Raspberry Pi (Various Styles and colors available)
Muti Use ABS V1
Muti Use ABS V2
Aluminum Alloy with Passive Cooling
Raspberry Pi Zero Compatible Power Supply
Inline on/off Switch
5 Ft Cable
Ferrite Bead-Noise Filter
Micro USB male To USB female adapter
Used to connect Keyboard etc.
HDMI to Mini HDMI Adapter
Enables Connection of a standard HDMI cable to the Raspberry Pi Zero MINI HDMI Port
Neatly Holds all the Pi zero Kit Parts and More!
Camera Module Adapter Cable
Enables Connection from the Pi Zero to a camera Module
15 Pin 1.0mm Pitch interface to 22 Pin 0.5mm interface.
40 Pin Pin Header (only included if not already presoldered)
2x 20 Pins
Overall Length: 50.60mm
Overall Width - 5.0mm
Vilros Quickstart Guide for Raspberry Pi Zero
Basic Instructions for Raspberry Pi Zero
Depending On case selection the kit may include a heatsink as well (check the main kit image of your selection to see if a heatsink is included)
Came with everything I needed without piecing things together. Good value.
Great package! I Love it! Works with other computers well, as well as, using it singulaily. Great design that uses barely any watts to run a "light show" device with the GPIO!!! :-) And, the case in the package works great for "isolating" the Pi Zero W from any "static discharge" problems. The only problem I found was that it did not "play well" with "expanding" the USB bus with a "4-port expander"...but, with VNC and SSL , that "hiccup" was easily solved. And..., for under 20$(US) you can't expect too much "desktop computer" capability. Thank you Vilros for a good "package" with a great computer. :-)
Arrived quickly and works great, but the metal case top with the hole for the GPIO pins simply did not sit flush enough to screw in. The closed top works well, though.
It arrived quickly with genuine Rasp Pi board + The Vilros parts of the kit are excellent! Thank you!
Very good communication at all times. Fast deliveries. A very pleasant experience. Hope to order from you again