INCLUDES:

Raspberry Pi Pico Board With Presolderered 20 Pin  Headers

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom

Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz

264KB of SRAM, and 2MB of onboard Flash memory

The castellated module allows soldering directly to carrier boards

USB 1.1 with device and host support

Low-power sleep and dormant modes

Drag-and-drop programming using mass storage over USB

26 × multi-function GPIO pins

2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels

Accurate clock and timer on-chip

Temperature sensor

Accelerated floating-point libraries on-chip

8 × Programmable I/O (PIO) state machines for custom peripheral support

USB Type-A to Micro Type-B 2.0 Cable

5-Pin

28/28AWG

3 AA Battery Holder With Micro USB Connector

Power the Pico on the GO

Raspberry Pi PICO GPIO Reference Card 

The reference card shows all the pinouts for easy programming.

Neoprene Parts Storage Case With Pocket

Internal Dimensions: 6 x 4.75 inches

Double Zipper 

Black Neoprene

Pocket for accessories storage 

Loop Handle

3 Pin header

1x 0.1" 3 Pin Male Header can be soldered onto Pico if the DECODE Pins.

• This pin is NOT Preordered as USING the DECODE pins is very rare.