Top Logo Sp Logo

Vilros Raspberry Pi 5 Compatible Aluminum Alloy Case with Passive & Active Cooling

In Stock

SKU: VILP287

 

This is the Flagship Vilros Aluminum Alloy Case For Pi 5.

It is a 2 part case designed to have the top part contact the main chip and pull the heat away from the board.
For situations of heavy use when the passive cooling is not adequate, the case also features a 10,00 max RPM Built-in PWM fan with a fan connector that connects directly to the fan port on the board and will automatically power on/off as needed as well as increase/decrease RPM based on the board temp.

In addition to great venting the cases, open slots on all sides offer a lot of flexibility for those looking to use many camera/display cables as well as an RTC battery.

The case also has an option for use in an open configuration without the top part for GPIO use as well as combability with most HATs.
When used without the top the case is compatible with the official active cooler

Features:

  • Built-in Passive & Active Cooling
  • Fully vented on top on bottom and on sides
  • Full access to all external ports
  • Fully Vented bottom and venting on top for fan
  • 2 Layer construction includes spacers to allow for use without top layer to easily accsess all internal ports .
  • Camera Module and HQ Camera Mounting holes
  • LED Pipe Built in Power button  to clearly show the board indicator light status on the outside of the case

 

Case Dimensions: 3.55x2.45x 1.05 Inches

Note:
This case contacts the main chip only.
Our testing has found that using a pi 5 board in this case it is not nessicary to add additional heatsinks on the other chips.
Customers who want to add additional heatsinks can add the Vilros 6 Piece Heatsink Set for Raspberry Pi 5 and add heatsinks to the 5 remaining chips.


 

by Vilros

Vilros Raspberry Pi 5 Compatible Aluminum Alloy Case with Passive & Active Cooling

$14.99
Free Shipping

 

This is the Flagship Vilros Aluminum Alloy Case For Pi 5.

It is a 2 part case designed to have the top part contact the main chip and pull the heat away from the board.
For situations of heavy use when the passive cooling is not adequate, the case also features a 10,00 max RPM Built-in PWM fan with a fan connector that connects directly to the fan port on the board and will automatically power on/off as needed as well as increase/decrease RPM based on the board temp.

In addition to great venting the cases, open slots on all sides offer a lot of flexibility for those looking to use many camera/display cables as well as an RTC battery.

The case also has an option for use in an open configuration without the top part for GPIO use as well as combability with most HATs.
When used without the top the case is compatible with the official active cooler

Features:

  • Built-in Passive & Active Cooling
  • Fully vented on top on bottom and on sides
  • Full access to all external ports
  • Fully Vented bottom and venting on top for fan
  • 2 Layer construction includes spacers to allow for use without top layer to easily accsess all internal ports .
  • Camera Module and HQ Camera Mounting holes
  • LED Pipe Built in Power button  to clearly show the board indicator light status on the outside of the case

 

Case Dimensions: 3.55x2.45x 1.05 Inches

Note:
This case contacts the main chip only.
Our testing has found that using a pi 5 board in this case it is not nessicary to add additional heatsinks on the other chips.
Customers who want to add additional heatsinks can add the Vilros 6 Piece Heatsink Set for Raspberry Pi 5 and add heatsinks to the 5 remaining chips.


 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)