About Magic Mirror V3
The Vilros Magic Mirror V3 is a complete smart mirror project kit that combines a two-way mirror with an internal LCD display and Raspberry Pi integration. The V3 includes a ready-to-connect internal LCD, making assembly faster compared to custom display installations.
What's included:
- Two-way mirror (acrylic or glass depending on variant)
- Internal LCD display (ready to connect)
- Mounting frame/enclosure
- Power supply and cables
- Raspberry Pi integration (Pi sold separately or included depending on kit)
Specifications
Weight (without Raspberry Pi): Approximately 15 pounds
The V3 unit weight does not include the Raspberry Pi board, power supply, or any additional accessories. The two-way mirror and internal LCD assembly contribute most of the weight.
Display: Internal LCD panel (size and resolution vary by kit version)
Mirror: Two-way mirror optimized for smart mirror applications (allows display visibility when backlit)
Power: Requires AC power for the internal display and Raspberry Pi
Mounting: Wall-mountable or freestanding depending on frame design
Assembly & setup
- Unpack components: Carefully remove the two-way mirror, LCD assembly, frame, and all included hardware from packaging.
- Install the LCD: The internal LCD is pre-positioned or ready to connect. Follow included wiring instructions to connect the display to the Raspberry Pi via HDMI.
- Mount the Raspberry Pi: Secure the Raspberry Pi (not included in weight spec) in the designated mounting location within the frame. Connect power and HDMI.
- Install MagicMirror² software: Flash the Raspberry Pi with MagicMirror² software (see our Magic Mirror V4 instructions for software setup steps - the process is the same for V3).
- Close the frame: Secure the two-way mirror in the frame, ensuring it's clean and properly aligned.
- Power on: Connect power to the display and Raspberry Pi. The system should boot and display the MagicMirror² interface behind the two-way mirror.
V3 vs V4
Magic Mirror V3: Features an internal ready-to-connect LCD display, reducing assembly complexity. Weighs approximately 15 pounds without the Pi.
Magic Mirror V4: Updated design with potential hardware improvements and refined assembly process. See the Magic Mirror V4 instructions for details on the newer version.
Software: Both V3 and V4 use the same MagicMirror² open-source platform, so modules, configuration, and customization are identical across versions.