Official Raspberry Pi Foundation Case for Pi 4

I have four different raspberry pi 4B’s and each has this case. It’s great for wireless since it’s plastic but two Pi’s have Ethernet connections but I still use the case. Can’t go wrong with this case.

Overall fits the board very snuggly, and there is no rattling when moving it around. It is a little tight around the SD card slot, which can make it a little hard to insert and remove, but as long as you are careful it is no issue. If you're having trouble removing the SD card, gently wiggle it side to side until you can get a good grip on it.

Showed up quick. Very basic case you can put a fan in if needed. The case has little ventilation but you can mode it with some holes. Secures the board well and it fits nicely. Has little rubber feet on the bottom keep it from sliding on a table.

Great little unit that protects my RPi 4B circuit board from dust etc in my rehearsal space. Fits perfectly, just had to make sure I carefully snapped it in so the MicroSD card slides in underneath completely.

This thing is awesome and all but there are no openings for ventilation and even for the fan

It's a very average case at a good price.

seems to work as expected

The design is cool and modern and it's easy to install. However, there are no holes for ventilation and the Pi4 tends to overheat a bit (nothing tragic). Also, it cannot be stacked, which is sometimes annoying.

Great sellers,

The product us amazing. Great fit with raspberry pi 4

Quick shipping of correct Pi4 case

A++++

Perfect fit and nice compact case.

Good case. Holds the Pi as it should and covers it. Only problem is that Pi 4 runs so hot the case turns into a oven with no airflow at all. This is even just idling without a load. Have used rasbian, ubuntu, and manjaro arm and they all make the case nice and toasty.

Would be better to get a case with a fan and or a heat sink. Sure you could fit a fan in with it but there's no way for the air to escape.

We bought the raspberry and the case, but there were no screws to attach the board to the case, would not suppose to be included if both were bought?