Vilros Raspberry Pi 3 Model B+ (B Plus) with 2.5A Power Supply

Vilros Raspberry Pi 3 Model B+ (B Plus) with 2.5A Power Supply

Model #: RP3+_POWER In Stock  

$59.99

This is the Raspberry Pi 3 Model B+ [ Pi3+ ] with Power Supply and Heatsink from Vilros

This starter package is the perfect gift to help you or your child get into creating projects with the newest Raspberry Pi 3 model b+ [ Pi3b+ ] Board . This Kit can also be used in school or college setting for educational use. This Raspbery pi 3 b+ kit comes equipped with the basic accessories to get you up and running in no time. This Rasberry Pi 3 b+ Kit is super easy to use, its as easy as baking a Rasbery Pie! The OS runs on Rasbian, a Linux distribution software. This kit requires a Micro SD Card to operate (sold separately )

Raspberry Pi 3 Model B Plus Specifications:
Processor: Broadcom BCM2837B0,Cortex-A53, 64-bit SoC @ 1.4 GHz Upgraded on the Pi3plus
Memory: 1GB LPDDR2 SDRAM
Connectivity:2.4 GHz and 5 GHz IEEE 802.11.b/g/n/ac wirelessLAN, ( Bplus ) Bluetooth 4.2, BLE–Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)–4 × USB 2.0 ports
Access: Extended 40-pin GPIO header
Video & sound: 1 × full size HDMI–MIPI DSI display port–MIPI CSI camera port–4 pole stereo output and composite video port
Multimedia:H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 3b graphics
SD card support: Micro SD format for loading operating system and data storage
Input power: 5 V/2.5 A DC via micro USB connector–5 V DC via GPIO header–Power over Ethernet (PoE)–enabled (requires separate PoE HAT for 3b+)
Environment: Operating temperature, 0–50 °C

All Parts of the kit are covered by Manufacturer (Vilros) Full 1 Year Warranty

Customer Reviews

Based on 18 reviews
89%
(16)
11%
(2)
0%
(0)
0%
(0)
0%
(0)
J
Josh R.
Missed an item but was sent out quick!

Everything came packaged well but was missing the heat sink. Reached out to customer service and I had a shipping label in my email before their response! Great customer service and will definitely continue to buy from this store.

Pi is working great on my ender 3 to run klipper/mainsail.

A
Andrew J.
First Pie

I love it. I'm using it as a octiprint server for my 3d printer. Easy to setup, up and running in about an hour.

d
dave

All was really Great !!! Getting ready to add it to my AllStar Reapeater !!

T
Timothy B.
The kit works fine. The instructi...

The kit works fine. The instructions are really poor.
There were no instructions on where to attach the heat sinks. I was able to find out (from another source) where the heat sinks went. Also, the heat sinks came with a paste to apply. The bag in which the paste was contained had instructions printed on the bag. Here's what the instructions on the bag said:
"Before mounting heat sink apply compound to the chip. Remove the paper from the thermal backing on the heat sink. Place heatsink on top of CPU."

Note that it said to apply the paste on the "CHIP". I sent an email to support and they responded that "The paste is to be used around each heatsink as an additional heat drawing mechanism from the chip. "

Again, I'm happy with the kit. I'm just fed up with lousy instructions. How hard can it be to write good (or at least much better) instructions?

C
C Z.
it works, used to make a PiHole...

it works, used to make a PiHole

GET IN TOUCH

MAKE:INSPIRE TEAM

x