Watch the setup video
Follow our complete setup video for the Complete Starter Kit:
The video provides a full walkthrough of unboxing, assembly, peripheral connections, and initial configuration.
Kit contents
Your Vilros Complete Starter Kit includes:
- Raspberry Pi board
- Power supply (USB-C or micro-USB depending on Pi model)
- MicroSD card with pre-loaded Raspberry Pi OS
- HDMI cable
- Protective case
- USB keyboard and mouse
- Ethernet cable (optional)
- Heat sinks and/or cooling fan (depending on kit configuration)
- GPIO reference card and quick start guide
Verify all components are included before starting assembly.
Assembly & connections
- Apply heat sinks: If included, remove the adhesive backing and apply heat sinks to the chips on the Raspberry Pi (CPU, RAM, etc.). Press firmly to ensure good contact.
- Install in case: Place the Pi in the protective case, aligning all ports with the case openings. Attach the top cover and secure with screws or clips.
- Insert microSD card: Insert the pre-loaded microSD card into the slot on the underside of the Pi.
- Connect peripherals: Connect the HDMI cable to your monitor. Plug in the USB keyboard and mouse. Optionally, connect the Ethernet cable for wired internet.
- Connect power: Connect the power supply to an outlet, then to the Pi's power port. The system will boot automatically.
First-time configuration
On first boot, the Raspberry Pi OS setup wizard will guide you through:
- Regional settings: Select your country, language, timezone, and keyboard layout.
- User password: Set a secure password for the default
piuser. - WiFi setup: If not using Ethernet, connect to your WiFi network.
- Software updates: Allow the system to check for and install updates (recommended). This process may take 5-10 minutes depending on connection speed.
- Reboot: The system will reboot after updates complete.
After setup, explore the desktop environment, try pre-installed applications, or visit the Recommended Software menu to install additional programs.