Arduino Sensor Kit - 10 Essential Sensors
Explore the Arduino Sensor Kit with 10 popular plug-and-play sensors on a Grove Base Shield for easy IoT projects.
- Arduino
- Beginner
- Varies by project
- 4 steps
Shop this project
CartYou'll need
Arduino Uno Rev 3Board Only$32.24
Prices from vilros.com. Tax and shipping at checkout.
Before you start, you'll need
- Arduino Uno
- Arduino Sensor Kit (with Base Shield)
- USB cable
Set up the Sensor Kit
About 10 minutes
Assemble Base Shield and sensors.
- Attach Grove Base Shield to Arduino Uno.
- Base Shield has 16 Grove connectors: 7 digital, 4 analog, 4 I2C, 1 UART.
- All 10 sensors plug directly into connectors (no soldering).
- Includes 6 Grove cables.
You should see
Base Shield is mounted on Arduino Uno.
Learn the 10 sensors
About 20 minutes
Understand each sensor's function.
- Push Button: indicates high/low state.
- LED: can be on, off, or dimmed.
- Potentiometer: variable resistor knob.
- Buzzer: binary sound output.
- OLED Display: shows text and graphics.
- Light Sensor: measures light intensity.
- Sound Sensor: microphone for sound detection.
- Temperature/Humidity Sensor: environmental monitoring.
- Air Pressure Sensor: barometric pressure via I2C.
- Accelerometer: detects motion and orientation.
You should see
You understand what each sensor does.
Run your first sensor project
About 15 minutes
Test a sensor with sample code.
- Connect LED module to digital port.
- Open Arduino IDE.
- Install Arduino Sensor Kit library.
- Load LED blink example from library.
- Upload and test.
You should see
LED sensor works with sample code.
Build multi-sensor projects
About 30 minutes
Use multiple sensors together.
- Connect temperature sensor and OLED display.
- Read temperature data.
- Display readings on OLED.
- Add sound sensor to trigger buzzer when loud noise detected.
- Experiment with combinations.
You should see
You've built a multi-sensor IoT project.
What to do next
Stuck? Contact Vilros Support with your board model and what you see on screen.