Argon Nanosound ONE Case

Sold Out

SKU: AF_NANOSOUND

The Nanosound One is a Hi-Fi Audio Player that comes with its own Raspberry Pi DAC Hat while fully supporting Volumio and ROON
HI-RES AUDIO AND WARM SOUND | The Texas Instruments PCM5122 chipset helps the Audio Player provide audio at 192kHz Sampling Rate and 24bit Resolution with 112-db SNR
LOW JITTER | The I²S bus in this Raspberry Pi Audio Player offers low jitter for a smooth, comfortable listening experience.
FULL CONTROL | Includes an Infrared Receiver and Remote Control to fully control your Raspberry Pi Player.
COOLING AND PROTECTION | The Hi-Fi Audio Player also acts as a heatsink for the Raspberry pi for safety and cooling.

Argon40 x NanoSound ONE - Raspberry Pi DAC Case | Digital to Analog Converter | Hi-Fi Player (Raspberry Pi4 Not Included)

#nanosound1 #raspberrypi #argonforty #science #coding #education #code #design #aluminum #ONE

NANOSOUND ONE Audio System Setup

HI-RES AUDIO AND WARM SOUND | Using the Texas Instruments PCM5122 chipset, Hi-Fi audio at 192kHz / 24bit Resolution with 112-db SNR

COOLING AND PROTECTION | Not only does this Raspberry Pi DAC case, but also acts as a heatsink for the Raspberry pi for safety and cooling.

NANOSOUND ONE Specifications

HI-RES AUDIO & WARM SOUND	Texas Instruments PCM5122 - 192kHz Sampling Rate / 24bit Resolution DAC with 112-db SNR
LOW JITTER	Using I2S bus, it separates clock and serial data signals, resulting in a lower jitter
FULL CONTROL	Infrared and Remote Control and via App
PLAY EVERYTHING	Plays dsd, mp3, wav, wma, aac and many streaming services. Airplay and Bluetooth casting
SUPPORTED OS	Volumio, Roon, Moode, Raspbian & many more

by Argon Forty

Argon Nanosound ONE Case

$79.99

The Nanosound One is a Hi-Fi Audio Player that comes with its own Raspberry Pi DAC Hat while fully supporting Volumio and ROON
HI-RES AUDIO AND WARM SOUND | The Texas Instruments PCM5122 chipset helps the Audio Player provide audio at 192kHz Sampling Rate and 24bit Resolution with 112-db SNR
LOW JITTER | The I²S bus in this Raspberry Pi Audio Player offers low jitter for a smooth, comfortable listening experience.
FULL CONTROL | Includes an Infrared Receiver and Remote Control to fully control your Raspberry Pi Player.
COOLING AND PROTECTION | The Hi-Fi Audio Player also acts as a heatsink for the Raspberry pi for safety and cooling.

Argon40 x NanoSound ONE - Raspberry Pi DAC Case | Digital to Analog Converter | Hi-Fi Player (Raspberry Pi4 Not Included)

NANOSOUND ONE Audio System Setup

HI-RES AUDIO AND WARM SOUND | Using the Texas Instruments PCM5122 chipset, Hi-Fi audio at 192kHz / 24bit Resolution with 112-db SNR

COOLING AND PROTECTION | Not only does this Raspberry Pi DAC case, but also acts as a heatsink for the Raspberry pi for safety and cooling.

NANOSOUND ONE Specifications

HI-RES AUDIO & WARM SOUND	Texas Instruments PCM5122 - 192kHz Sampling Rate / 24bit Resolution DAC with 112-db SNR
LOW JITTER	Using I2S bus, it separates clock and serial data signals, resulting in a lower jitter
FULL CONTROL	Infrared and Remote Control and via App
PLAY EVERYTHING	Plays dsd, mp3, wav, wma, aac and many streaming services. Airplay and Bluetooth casting
SUPPORTED OS	Volumio, Roon, Moode, Raspbian & many more

Pound for pound the best audio case for a Raspberry Pi 4

I have tried quite a few cases and audio hats for my Raspberry Pi 4. This case is very sleek and stylish to put your Pi into. It looks great on a desk or any surface. It is small form factor and still gives access to the GPIO port. If you want a case for your Raspberry Pi 4 and want to add audio capabilities for Volumio, Roon, Moode or any music program. Then this is the case for you. I highly recommend for you.

Good value

This mini fan moves a lot of air for its size. It can cool my Raspberry Pi's CPU from its 70 degree setpoint by 10 degrees in well under a minute. A bit noisy but not very distracting.

High Quality Pi5 Kit

My fourth Pi, first with Vilros. Best kit yet. I opted for the 8GB with alloy case. Very sturdy, got it put together and running on external M.2 NVME with ease. Configuration was a snap, especially the VNC as I like to run the Pi standalone and remote in with gui. Performance in all areas far exceeded my expectations.

Fixed the problem

Now the low voltage sign has totally dissapeared. Very satisfied.

Love It

Very happy with the mirrors we bought.
Well put together, shipped quickly.
Will be getting more.

Amazing but a bit expensive

This product is so good and has so much care put in great product but a bit expensive

Results for your search

Type

Search Result

Selected Filters

Category

Case Color

Vendor

Type

Price Range

Argon Nanosound ONE Case

Argon40 x NanoSound ONE - Raspberry Pi DAC Case | Digital to Analog Converter | Hi-Fi Player (Raspberry Pi4 Not Included)

NANOSOUND ONE Audio System Setup

HI-RES AUDIO AND WARM SOUND | Using the Texas Instruments PCM5122 chipset, Hi-Fi audio at 192kHz / 24bit Resolution with 112-db SNR

COOLING AND PROTECTION | Not only does this Raspberry Pi DAC case, but also acts as a heatsink for the Raspberry pi for safety and cooling.

NANOSOUND ONE Specifications

Argon Nanosound ONE Case

Argon40 x NanoSound ONE - Raspberry Pi DAC Case | Digital to Analog Converter | Hi-Fi Player (Raspberry Pi4 Not Included)

NANOSOUND ONE Audio System Setup

HI-RES AUDIO AND WARM SOUND | Using the Texas Instruments PCM5122 chipset, Hi-Fi audio at 192kHz / 24bit Resolution with 112-db SNR

COOLING AND PROTECTION | Not only does this Raspberry Pi DAC case, but also acts as a heatsink for the Raspberry pi for safety and cooling.

NANOSOUND ONE Specifications

Customer Reviews

Recently viewed

Let customers speak for us